-
Axial Turbine Design Online Training (Theory and Workshop)
This course will familiarize students with the basics of steam and gas turbine design. The program includes theoretical knowledge as well as hands-on experience with industry-leading software tools. It begins with a theoretical overview of turbine thermodynamics, gas dynamics and cycles, to continue with preliminary design, detailed design, analysis and optimization of axial turbines at the 1D, 2D and 3D levels including 3D blade design, FEA and CFD analysis.
In addition to the course contents, all registrants will receive a trial software license of AxSTREAM EDU to supplement the subject matter.
-
Axial Turbine Workshop
This workshop covers the software portion of the Axial Turbine Design Online Training and will guide students through the full design, analysis, redesign and optimization of axial turbines for any working fluid using the AxSTREAM® platform. The program will start with preliminary design before moving on to meanline and streamline calculations, blade profiling and stacking, geometry import, to finish with 3D FEA and 3D CFD analyses.
In addition to the course contents, all registrants will receive a trial software license of AxSTREAM EDU to supplement the subject matter.
-
Radial Turbine Design Online Training (Theory and Workshop)
The goal of this flexible training is to provide engineers with a better understanding of radial turbines and help them find new, more accurate, cost-saving solutions through successful radial turbine design and operation tasks. The course begins with a theoretical overview of turbine thermodynamics, gas dynamics and cycles, and continues with preliminary design, detailed design, analysis and optimization of radial turbines at the 1D, 2D and 3D levels including 3D blade design, FEA and CFD analysis and more. In addition to the course contents, all registrants will receive a trial software license of AxSTREAM EDU to supplement the subject matter.
-
Radial Inflow Turbine Design Workshop
This workshop covers the software portion of the Radial Turbine Design Online Training and will guide students through the full design, analysis, redesign and optimization of radial turbines. The course begins with preliminary design of radial inflow turbines, continues onto meanline/streamline analysis, and finishes with 3D FEA and CFD analyses.
In addition to the course contents, all registrants will receive a trial software license of AxSTREAM EDU to supplement the subject matter.
-
Centrifugal Compressor Design Online Training (Theory and Workshop)
This course will familiarize students with the basics of centrifugal compressor design. The program will start with a theoretical overview of compressor thermodynamics, gas dynamics and design analysis, and end with typical examples implementing the suggested procedures.
In addition to the course contents, all registrants will receive a trial software license of AxSTREAM EDU to supplement the subject matter.
-
Centrifugal Compressor Design Workshop
This workshop covers the software portion of the Centrifugal Compressor Design Online Training, including 5.5 hours of videos featuring software demonstrations and explanations related to the design, analysis and optimization of centrifugal compressors.
In addition to the course contents, all registrants will receive a trial software license of AxSTREAM EDU to supplement the subject matter.
-
Axial & Centrifugal Pumps Design Online Training (Theory and Workshop)
This course will lay the groundwork required for all engineers who are involved in design, optimization and operation of pumps, providing engineers with an in-depth understanding of the principles involved in hydraulic pump design. The course will highlight fundamentals before diving into practice examples using commercial software.
In addition to the course contents, all registrants will receive a trial software license of AxSTREAM EDU to supplement the subject matter. -
Axial & Centrifugal Pumps Design Workshop
This workshop covers the software portion of the Axial & Centrifugal Pumps Design Online Training. Engineers will be guided through different examples of complete pump design using AxSTREAM® - starting from preliminary design and branching out to 3D analyses (CFD & FEA), meanline calculations, reviewing of cavitation parameters, and more.
In addition to the course contents, all registrants will receive a trial software license of AxSTREAM EDU to supplement the subject matter.
-
Rotor Dynamics and Bearing Online Training
This comprehensive course covers rotor dynamics analyses and bearings simulation for different types of rotors. It covers rotor dynamics fundamentals, basic design rules, analyses according API and other standards, and bearing simulation aspects.
In addition to the course contents, all registrants will receive a trial software license of AxSTREAM RotorDynamics EDU to supplement the subject matter.
-
API Standards In Rotor Dynamics Seminar
The seminar discusses how API standards can be treated and why these rules should be satisfied. Attention will be paid to rotor dynamics analysis reports and understanding of what information must be presented, how to interpret that information and associated charts with results, and what conclusions can be drawn about reliability. Fundamentals including an overview and theoretical background of rotor dynamics, as well as practical cases for different rotor-bearing systems, are also considered to give a clear understanding of the subject.
-
Waste Heat Recovery Design Online Training
This comprehensive course provides in-depth insight into cycle analysis and turbine engineering, starting from general discussions of energy systems and opportunities for waste heat recovery and ending with complete design of flow path and 3D blades for the turbine with attachments.
In addition to the course contents, all registrants will receive an EDU software trial license to supplement the subject matter
-
AxSTREAM NET™ Online Training
This comprehensive course program includes over 6 hours of videos explaining the use of AxSTREAM NET for multiple applications through a presentation of the different components and capabilities available along with some real-life examples and some walkthrough of specific tutorials. These include, but are not limited to, steady-state and unsteady calculations, flow modeling in pipes, pipelines, chambers, splitters, entrances, expansions, rotor-stator cavities, batch mode, etc. In addition to the course contents, all registrants will receive a trial software license of AxSTREAM NET EDU to supplement the subject matter.
-
AxCYCLE™ Thermodynamic Cycle Design Workshop
This is an introduction to AxCYCLE™ for design, analysis and optimization of thermodynamic cycles utilizing steam and combined gas-steam cycles as examples. All registrants will receive a trial software license of AxCYCLE EDU to supplement the subject matter.
-
Axial Fan Design Workshop
This course dives into the design, analysis and optimization tasks that can be undertaken with AxSTREAM for Axial Fans.
All registrants will receive a trial software license of AxSTREAM EDU to supplement the subject matter.
-
Axial Compressor Design Online Training
This online course will go through the fundamental knowledge regarding the basics of axial compressors and their aerodynamic for design and off-design conditions (including discussing stall, choke and surge). Theories of blade profiling will also be presented. Each of the mentioned topics in the theoretical part will be covered in AxSTREAM to show practical examples of designs as well as thorough training on the software to design, analyze and optimize axial compressors.
-
Turbocharger Design Online Training
Our turbocharger design training will go over the theoretical knowledge required to design, analyze and optimize radial turbines and centrifugal compressors as well as how to match them together. The scope covered both in the fundamentals and AxSTREAM, includes everything from conceptual design to analysis of a machine for design and off-design conditions, blade profiling and 3D analyses (FEA & CFD).
-
径流式透平设计
学习使用AxSTREAM®平台设计、分析、再设计和优化向心式透平。 课程从向心式透平的概念和初始设计开始，到均线/流线分析，直至完成三维FEA和CFD分析。
-
离心压缩机设计在线培训教程
本综合性课程项目有5.5个小时的视频，包含与离心压缩机设计、分析和优化相关的软件功能演示和解释。学习关于流道设计，FEA和CFD分析以及更多！
-
转子动力学和轴承在线培训
该综合课程涵盖了不同类型转子的转子动力学分析和轴承模拟。 它涵盖了转子动力学基础，基本设计规则，API和其他标准分析以及轴承模拟等各方面。
-
轴流透平在线课程
该课程会带领学员熟悉用AxSTREAM®平台使用任意的工质来对轴流透平进行完整设计，分析，重新设计以及优化。课程会从初始设计开始，到中线以及流线计算，叶片塑形和堆叠，几何导入，使用三维FEA以及三维CFD分析来完成整个过程。
-
Radial Outflow Turbine Design Online Workshop
This course dives into details on the process of radial-outflow turbine design using the AxSTREAM platform from preliminary design to meanline calculation, performance map, blade profiling and finally 3D analysis (CFD ) while also covering how to reverse engineer such geometry. All registrants will receive a trial software license of AxSTREAM EDU to supplement the subject matter.
-
Axial Compressor Design Workshop
The goal of this course is to provide engineers with a better understanding of axial compressor design using the AxSTREAM platform. Throughout the course, attendees will have hands-on experience using the AxSTREAM platform to help them find new more accurate and efficient axial compressor designs, troubleshoot, upgrade, and optimize existing designs.
In addition to the course contents, all registrants will receive a trial software license of AxSTREAM EDU to supplement the subject matter.
-
Axial Compressor Design Online Training (Theory and Workshop)
The goal of this course is to provide engineers with a better understanding of axial compressor design through theoretical lectures and hands-on workshops using the AxSTREAM Platform, in order to help them find new, more accurate and efficient axial compressors, troublebshoot, upgrade and optimize existing designs and more
In addition to the course contents, all registrants will receive a trial software license of AxSTREAM EDU to supplement the subject matter.
-
AxSTREAM ION Online Workshop
The goal of this course is to provide participants with an overview of AxSTREAM ION™ and its functionalities as a process integration, automation, and design optimization software that allows connection of various tools to let users pilot their projects in a user-friendly and flexible package. In addition to the course contents, all registrants will receive a trial software license of AxSTREAM ION EDU to supplement the subject matter.
-
AxSTREAM System Simulation Online Core Workshop
This course is intended to provide participants with an overview of AxSTREAM System Simulation™ for the modelling of 0D and/or 1D systems. Attendees are taken through thermodynamic cycles and thermal-fluid networks to build the foundations of good practice to work with the software. In addition to the course contents, all registrants will receive a trial software license of AxSTREAM System Simulation™ EDU to practice the bases taught. This course focuses on the core capabilities and acts as a pre-requisite to learning the additional course specializations available.
-
AxSTREAM® Workshop: Axial Turbine Design for Gas Turbines
-
Rotor Dynamics Online Training
This comprehensive course covers rotor dynamics analyses and bearings simulation for different types of rotors. It covers rotor dynamics fundamentals, basic design rules, analyses according API and other standards, and bearing simulation aspects.
-
AxSTREAM® Workshop: Centrifugal Compressor Design
-
AxSTREAM NET™ Workshop: Thermal-Fluid System Modeling
-
SoftInWay Technical Support Training
Internal training for SoftInWay engineers to ensure they understand basic directives when responding to clients
-
Heat Balance Calculation with AxCYCLE Online Training
This is an introduction to AxCYCLE™ for design, analysis and optimization of thermodynamic cycles utilizing steam and combined gas-steam cycles as examples.
-
Axial Turbine Design Online Training (Archive)
This course will familiarize attendees with the basics of steam and gas turbine design. The program will start with a theoretical overview of turbine thermodynamics, gas dynamics and structural analysis, and end with typical examples implementing the suggested procedures.
-
Test Course
Test course
